The Model H-778™ offers the following features:

• System provides up to 100 cups of 190°F water per hour
• Chrome-plated faucet completely insulated from 190°F water.
• Die-molded, high efficiency, expanded polystyrene thermal barrier surrounds tank for low heat loss.
• Adjustable thermostat, convenient drain, thermally fused to prevent tank damage from dry start-up or loss of water.
• Tank is always open to atmospheric pressure and requires no relief valves.
• Spout is elevated to fill large containers.
• Stainless steel case.
• Mounts in standard sink opening or 1-1/4" drilled hole.
• Minimum water required

The Model H-778™ has the following Specifications.

Includes InSinkErator® Model H-778 2/3-gallon capacity insulated tank with drain plug, 1300 watt heater, instant self-closing valve, adjustable thermostat, 1-year full warranty on parts and labor.Electrical 1300 watts, 11.3 amps, 120 voltsA.C. U.L. listed: 3-wire cord and 3-prong plug provided.Snap-action, adjustable thermostat from 140°F to 200°F (factory pre-set at 190°F).Insulation meets U.L. 94HF-1 flammability specificationInstant, self-closing valve.


Specifications
Installation Care and Use Manual


InSinkErator may make improvements and/or changes in the specifications at any time, in its sole discretion, without notice or obligation and further reserves the right to change or discontinue models.

There are no accessories available for this model

Model H-778™ has a one year warranty from date of installation.
The warranty includes parts and labor, provided the service is performed by an InSinkErator® Factory Authorized Service Center.

This warranty does not apply if a disposer failure is due to: faulty or improper electrical installation, faulty or improper plumbing installation, product abuse or misuse, accidental damage, grinding elements jammed by foreign objects, clogged drain lines, improperly sized unit (as specified by InSinkErator®).

ISO 9001 Certification
Since 1995, InSinkErator's quality system has been independently verified to meet the requirements of ISO 9001. The International Organization for Standardization, known as ISO, is a group which provides for the development of international standards. ISO 9001 specifies the basic requirements for a quality management system that an organization must fulfill to demonstrate its ability to consistently provide products (which include services) that enhance customer satisfaction and meet applicable statutory and regulatory requirements. InSinkErator's certification to ISO 9001 includes the design, manufacture and sale of its products. Use the following link to find out more about the customer focused principles behind ISO 9001 and why InSinkErator has self-imposed its requirements, http://www.iso.org/iso/qmp.htm

Warranty Information