InSinkErator | Model H-778™

Insinkerator

Company Profile
Directory
Heritage

Why Have a Compactor?

Models
Model 8251W
Model 8251SS

Disposers:
Model LC-50™
Model SS-50™
Model SS-75™
Model SS-100™
Model SS-125™
Model SS-150™
Model SS-200™
Model SS-300™
Model SS-500™
Model SS-750™
Model SS-1000™

Pulpers:
Model WX-300™

Hot Water Systems:
Model H-778™
Model C1300™

Ultra Systems:
Model UW
Model UWL

Compact Water Heaters:
Model W154
Model W152

Electrical Controls:
Manual Switch
Low Voltage Manual Switch
Manual Reverse Switch
CC202 Control Panel
CC101 Control Panel
AS101 Control Panel
AS Module

Mountings:
#5 Sink Flange
#6 Collar Adaptor
#7 Collar Adaptor
Type A Bowl (12", 15", 18")
Type B Bowl (12", 15", 18")
Type C Bowl (12", 15", 18")

Water Controls:
Syphon Breaker
Flow Control Valve
Solenoid Valve

Accessories:
Dejamming Wrench
Silver Saver
Waste Outlet Reducing Flange
Reel Rinse with Spray Head
Disposer Support Legs
Time Delay Relay
Throat Guard
Offset Chute
Tamper Proof Screw Kit

Model H-778™ InSinkErator® commercial hot water systems reduce serving time, require no expensive pipe runs and are easy to install. That's why we're number one with foodservice operators, equipment dealers and consultants.Our commercial hot water dispensers provide 190°F near boiling water instantly. Prepare up to 100 cups of hot water per hour for tea, coffee, soups, sauces and more. That really speeds up serving time in restaurants, school cafeterias, coffee shops, convenience stores and kiosks.Designed for large volume usage of steaming hot water. Up to 100 cups of 190°F hot water per hour are provided by the system's 1/2 gallon tank. Saves time, work and water -- you only heat the water you use.

Model H-778™


	The Model H-778™ offers the following features: System provides up to 100 cups of 190°F water per hour Chrome-plated faucet completely insulated from 190°F water. Die-molded, high efficiency, expanded polystyrene thermal barrier surrounds tank for low heat loss. Adjustable thermostat, convenient drain, thermally fused to prevent tank damage from dry start-up or loss of water. Tank is always open to atmospheric pressure and requires no relief valves. Spout is elevated to fill large containers. Stainless steel case. Mounts in standard sink opening or 1-1/4" drilled hole. Minimum water required The Model H-778™ has the following Specifications. Includes InSinkErator® Model H-778 2/3-gallon capacity insulated tank with drain plug, 1300 watt heater, instant self-closing valve, adjustable thermostat, 1-year full warranty on parts and labor.Electrical 1300 watts, 11.3 amps, 120 voltsA.C. U.L. listed: 3-wire cord and 3-prong plug provided.Snap-action, adjustable thermostat from 140°F to 200°F (factory pre-set at 190°F).Insulation meets U.L. 94HF-1 flammability specificationInstant, self-closing valve. Quick Installation Guide Specifications Installation Care and Use Manual You may need to download Adobe Acrobat Reader to view these documents. InSinkErator may make improvements and/or changes in the specifications at any time, in its sole discretion, without notice or obligation and further reserves the right to change or discontinue models. There are no accessories available for this model Model H-778™ has a one year warranty from date of installation. InSinkErator products are warranted against defects in material and workmanship for the period of the warranty from the date of purchase. If service is required, contact an InSinkErator Authorized Service Center listed in the box of each of our international products. Warranties are void if you remove your product after installation and attempt to repair it, or if the product is used for commercial purposes (except for commercial models).

1.800.558.5700