The Model W152 offers the following features:

• Two sizes: Model W154, 4 gallon. Model W152, 2 1/2 gallon.
• Bronze, long-life storage tank. Nothing to corrode or wear out.
• Screw-in copper heating element can be easily replaced.
• Tank is insulated with expanded polystyrene, then jacketed in steel for maximum heat retention, minimum standby heat loss.
• Super fast recovery rate for better service.
• Drain provided for easy maintenance.
• Easy to install. Fits almost anywhere -- under sinks,in cabinets, etc.
• Adjustable temperature range of 110° to 170° F.
• Operates on ordinary house current (110-120 volts).
• Comes with 3 1/2 foot cord and grounded plug.

The Model W152 has the following Specifications.

Tank Construction: Bronze.
Tank Volume: W-152: 2 1/2 U.S. gallons; W-154: 4 U.S. gallons.
Voltage: 120 v.
Heating Capacity: 1500 watts.
Element Type: Replaceable cartridge type.
Temperature Range: 110° -170° F.
Operating Pressure: 150 psi (max).
Thermostat Type: Resetable.
First Hour Rating (80°F RISE): W-152: 8.6 gal.; W-154: 10.4 gal.
Water Connections: 1/2" NPT female.
Pressure Relief Connection: 3/4" NPT female.
Overall Dimensions: W-152: 13.5"H x 10.4"D x 10.7"W.; W-154: 20.2"H x 10.4"D x 10.7"W.


Specifications
Installation Care and Use Manual


InSinkErator may make improvements and/or changes in the specifications at any time, in its sole discretion, without notice or obligation and further reserves the right to change or discontinue models.

There are no accessories available for this model

Model W152 has a one year warranty from date of installation. Limited 5-year warranty against tank leakage.
The warranty includes parts and labor, provided the service is performed by an InSinkErator® Factory Authorized Service Center.

This warranty does not apply if a disposer failure is due to: faulty or improper electrical installation, faulty or improper plumbing installation, product abuse or misuse, accidental damage, grinding elements jammed by foreign objects, clogged drain lines, improperly sized unit (as specified by InSinkErator®).

ISO 9001 Certification
Since 1995, InSinkErator's quality system has been independently verified to meet the requirements of ISO 9001. The International Organization for Standardization, known as ISO, is a group which provides for the development of international standards. ISO 9001 specifies the basic requirements for a quality management system that an organization must fulfill to demonstrate its ability to consistently provide products (which include services) that enhance customer satisfaction and meet applicable statutory and regulatory requirements. InSinkErator's certification to ISO 9001 includes the design, manufacture and sale of its products. Use the following link to find out more about the customer focused principles behind ISO 9001 and why InSinkErator has self-imposed its requirements, http://www.iso.org/iso/qmp.htm

Warranty Information